Doha North Sewage Treatment Works (DNSTW), Qatar

Doka supplied formwork for construction of various facilities of the Doha North Sewage Treatment Works project. Image courtesy of Doka.

The Doha North Sewage Treatment Works project is being carried out in four phases. Image courtesy of Doka.

The project is expected to serve a population of 900,000 people by 2020. Image courtesy of Doka.

Doha North Sewage Treatment Works (DNSTW) is a significant sewage treatment project being undertaken by the Public Works Authority of Qatar (Ashghal).

The project site is located about 25km north of Doha. Construction works for the project commenced in February 2008.

The project was carried out in two phases and was operational in December 2015. It is targeted to serve a population of 900,000 citizens by 2020, treating 245,000m³ of wastewater on a daily basis.

Treated wastewater from the project site is utilised for irrigation and other non-potable purposes, while the sludge from the treatment plant is used as soil conditioner in the neighbouring agricultural fields and as a source of green energy.

The project primarily serves the city of Doha and its neighbouring suburbs, comprising Umm Salal, Gharafa, Semiesma and Lusail.

Phase one of the project involved the construction of a PS70 pumping station located at Al Kheesa, pumping mains and other ancillary works. PS70 has a capacity to process 46,000m³ a day.

It also included the construction of the main complex of the sewage and sewerage lines by micro-tunnelling. The complex was micro-tunnelled at depths ranging from 25m to 34m. Concrete pipes measuring 2.4m in diameter and 32km in length were laid.

A pipeline measuring 45km in length and 1.6m in diameter was also laid from the pumping station to the wastewater treatment plant. A sewage pumping station for treated sewer effluent (TSE 3) was also built. The contract also included the construction of the connecting pipelines and mains.

Phase two of the project involved construction of a thermal drying plant (TDP) within the facility. The TDP comprises four thermal dryers, of which two dryers will be installed in the second quarter of 2016 and the remaining two dryers will be installed in the third quarter of 2016.

Wastewater at the plant is treated in three stages. The first stage involves fine screening using step screens and grit removal using vortex degritters.

The secondary treatment involves biological treatment using an anaerobic-anoxic-aerobic (AAA) method for the removal of organic material and nitrogen from the wastewater. The treatment process in this stage also includes clarification / sedimentation through the use of settling tanks.

The tertiary treatment comprises granular media filtration using dual media filters, ultrafiltration using an advanced membrane and disinfection using ultraviolet (UV) technologies.

Sludge recovered from the plant following the secondary treatment process undergoes digestion, thickening, dewatering and wet sludge treatment. The treatment of sludge is done using aerobic digesters, centrifuges and thermal sludge dryers.

The wastewater treatment plant is further equipped with odour control facilities.

Kepel Seghers was awarded with the design, build and operate contract for the first phase of the project in September 2007. The contract is worth QR3.6bn ($1.5bn).

Phase two of the project has been contracted to Vinci Construction Grands Projets, Entrepose Contracting and QDVC. This contract is valued at QR1.78bn ($489m).

Ultra Construction and Engineering is responsible for the construction of main complex of the sewage and sewerage lines. The contract is worth QR1.3bn ($352m).

Marubeni Corporation is responsible for the construction of sewage pumping station for TSE 3 under a QR1.3bn ($352m) contract. The company further subcontracted Qatar Building Company (QBC) to carry out the construction works for sewage pumping station, pipelines and mains.

Rotork is supplying its IQ Pro intelligent electric valve actuation technology to assist in the operations of the wastewater treatment plant. Mechanical and electrical installation works at the project site are being carried out by AMEM.

Formwork for the construction of various facilities at the project site was provided by Doka.

The XIGA UV membranes and standardised UV skids used by the treatment plant were provided by Norit X-Flow.

Two automatic bag packing and palletising systems used for conveying the treated sludge were supplied by Webster Griffin, who acted as a subcontractor to TSL Engineering. The contract is worth $800,000.

The aerobic digester and SAS balancing tank were built by the ITC Group. Construction management services for the project are being provided by Stanley Consultants.

In common with many areas in the United Arab Emirates, Sharjah is undergoing a phase of rapid growth.

As-Samra Wastewater Treatment Plant (WWTP) is the largest wastewater treatment facility in Jordan. The plant was built to replace the old and overloaded As-Samra Wastewater Stabilisation Ponds (WSP).

Muscat wastewater project, which includes the construction of what is expected to be the largest membrane bioreactor (MBR) plant in the world, is an ambitious programme that will ultimately serve 90% of the city's inhabitants by 2017.